Skip to main content

Wobble-6PRO-Plus

The Best handheld Laser Torch Available

WOBBLE6-PRO+: the best handheld Laser torch on the market!

Available from 01 - 2022

Laser beam welding (LBW) is a material-joining technique that applies laser radiation to melt the base material and create the welding joint. Laser beam welding process is related to other traditional welding methods, such as electron beam welding (EBW), tungsten plasma arc welding (PAW), or inert gas tungsten arc welding (TIG).
Laser beam welding applies a high power industrial laser to create a narrow and deep melt pool between the parts to be welded. Laser is a highly concentrated heat source that can be easily automated and installed on industrial welding cells or mounted in a handheld gun like our wobble-3, providing high welding speeds for many industrial applications.
Nevertheless, factors such as the laser beam quality or the processed materials have a great influence on the resulting geometry, microstructure, and residual stress distribution. Therefore, final results are directly dependent on the process input parameters, which means that process parameters must be carefully selected for achieving the desired quality.
Laser welding uses high-energy laser pulses to locally heat the material in a small area.
The energy of the laser radiation diffuses into the material through heat conduction,
and the material is melted to form a specific molten pool.
It is a new type of welding method, mainly for the welding of thin-walled materials and precision parts,
which can realize spot welding, butt welding, stack welding, sealing welding, etc.
The welding speed is fast, no treatment is needed after welding, and the quality of the weld is high.
The weld can be precisely controlled, small focus spot, high positioning accuracy, easy to automate.

What is Fiber laser WOBBLE Welding?

Standard welding heads are designed to focus a collimated laser beam to a required spot size, keeping the beam path static through the beam delivery and a static spot at the focal plane. This standard configuration limits each setup to a specific application.
Wobble heads, on the other hand, incorporate scanning mirror technology inside a standard weld head.
By moving the beam with internal mirrors, the focal spot is no longer static, and can be dynamically adjusted by changing the shape, amplitude, and frequency.

Wobble Laser Welding visual explained

Standard welding heads limits each setup to a specific application.

Wobble welding heads incorporate scanning mirror technology inside a standard weld head.

The wobble welding head is equipped with a rotating lens "weaving". By moving the beam with internal mirrors, the focal spot is no longer static, and can be dynamically adjusted by changing the shape, amplitude, and frequency of various patterns. This allows the laser beam to circle within a defined radius and makes it possible to reliably bridge larger gap sizes than were possible in the past. This both with and without a welding rod, even within the same part.

The result is that less material is deposited, the heat input is reduced and precisely defined weld edges that require almost no retouching are achieved.

Thanks to the use of the Wobbling weaving technique, it is possible to bridge gaps that are up to 30%~50% wider than is possible using conventional laser welding systems while retaining the same high quality or even achieving better quality.

New Handheld Laser Welding Machine

Easy Operate, Any One, Any Metal!

500W / 1000W / 1500W / 2000W

Laser Power

0~150 mm/s

Working Speed

0.5-4 mm

Welding Thickness

1070nm

Wave Length

WOBBLE-3: Fiber Laser Hand Welder

The welding speed is 2-10 times faster than the traditional welding speed.

Wobble welding technology allows to skip the filler material while achieving a high quality welding seam.

Wobble Head Welding - Seam Gap and Seam Offset

A factor of 2-3 increase in both process parameters can be achieved compared to conventional laser welding without Wobbling!

Seam Sealing Butt Weld with Loose tolerance

Bridge wide gaps with our Wobble-3

Larger Wobbling Spot Size helps bridging bigger gaps

The required tolerance for fit-up is reduced

The lower tolerances needed reduce the machining costs

Non tolerance parts can still be used : less scrap, less losses = big savings

Maximum yield and quality of welded part

Dissimilar Metal Welding of Sheet Metal Components

Join Stainless steel with zinc coated steel without cracking, porosity or blowholes!

The ability to create products using different metals and alloys greatly increases both design and production flexibility. Optimizing properties such as corrosion, wear and heat resistance of the finished product while managing its cost, is a common motivation for dissimilar metal welding.

Joining stainless steel and zinc coated (galvanized) steel is a one example. Because of their excellent corrosion resistance, both 304 stainless steel and zinc coated carbon steel have found widespread use in applications as diverse as kitchen appliances and aeronautical components.

The process presents some special challenges, particularly since the zinc coating can present serious problems with weld porosity. During the welding process, the energy that melts steel and stainless steel will vaporize the zinc at approximately 900⁰C, which is significantly lower than the melting point of the stainless steel.

The low boiling (vaporization) point of zinc causes a vapor to form during the keyhole welding process. In seeking to escape the molten metal, the zinc vapor may become trapped in the solidifying weld pool resulting in excessive weld porosity. In some cases, the zinc vapor will escape as the metal is solidifying creating blowholes or roughness of the weld surface.

With proper joint design and selection of laser process parameters, cosmetic and mechanically sound welds are readily produced. As shown below, the top and bottom surfaces of an overlap weld of 0.6 mm thick 304 stainless steel and 0.5 mm thick zinc coated steel exhibit no cracking, porosity, or blowholes.

  • left : Bottom bead (back side) of lap weld of 304 stainless steel and zinc coated steel. Shown is the zinc coated steel surface.
  • right: Top bead of lap weld of 304 stainless steel and zinc coated steel. Shown is the stainless steel surface.

Dissimilar Metal Welding - Different metals perfect joining by Fiber laser

As with any welding process, establishing a good fiber laser weld involves a lot of variables.

A material’s weldability is a factor. Most common materials a fab shop will process—be it carbon steel, stainless, or aluminum—have been successfully laser welded for years, using both continuous wave and pulsed modes. Lasers have performed dissimilar-metal welding ( Sample picture is copper joined with stainless steel by fiber laser welder), and specialized weld joint designs in galvanized material have even accounted for zinc outgassing. Moreover, a multikilowatt fiber laser has been shown to successfully weld even the most challenging of materials, including copper

Lasermach WOBBLE-3: Third Generation Handheld fiber laser welding machine

Fast, economical and safe hand welding with fiber laser beam

WOBBLE-Plus: We offer best of both worlds in ONE machine!

Two Classes Of Fiber Laser Welding For Different Product Design Needs In ONE Machine

Autogenous Welding: 

  1. Materials are joined without the addition of extra materials which requires the highest level of fixturing and joint preparation. Since no material is added, it is necessary for the materials to be welded to remain in intimate contact during the welding process. Any significant separation of the materials can result in an unacceptable weld profile or complete failure of the welded joint. Wobble-3 prevent this to happen!
  2. Fixturing to ensure consistent fit-up of the weld joint is a key to successful fiber laser welding. An important benefit of fiber laser is welded joints with exceptional cosmetic appearance. In some cases, these welds are almost perfectly blended with the surrounding material. Depending on the fixturing and joint fit-up, some welds may have small amounts of concavity (which may not be acceptable for product designs that require fatigue properties similar to those of the base material) or convexity. Again Wobble-3 avoid this problems!

Additive Welding:

Material is added to the weld joint usually in the form of metallic wire or powder. Three reasons for adding material to the weld are:

  1. Joint fit-up: By adding extra material, the joint becomes more tolerant to joint mismatch. Acceptable welds may be produced from joints with less than perfect fit-up.
  2. Weld geometry: Addition of filler metal is used to control the shape and size of the weld. Maintaining a crown (convex surface of the weld) creates a reinforcement which is important for joints requiring mechanical strength and fatigue life in the overall product’s design performance.
  3. Dissimilar metals: Filler metal is added to facilitate welding of dissimilar metals and alloys which are otherwise metallurgically incompatible.

Visit our special Laser Welding Website

Click here to visit our special website for Wobble Fiber Laser Welding Machines

WOBBLE-PRO Series+ & Wobble-R+: Affordable high Quality Handheld Fiber Laser Welding Machines

www.laserwobblewelding.com

▪ العربية - لحام بحزمة ليزرية▪ বাংলা - লেজার বীম ওয়েল্ডিং▪ Català - Soldadura per raig làser▪ Deutsch - Laserschweißen▪ English - Laser beam welding▪ Español - Soldadura por rayo láser▪ Français - Soudage laser▪ עברית - ריתוך בלייזר▪ Hrvatski - Zavarivanje laserskim snopom▪ Italiano - Saldatura laser▪ 日本語 - レーザー溶接▪ Polski - Spawanie laserowe▪ Português - Soldagem a laser▪ Română - Sudarea cu laser▪ Русский - Сварка лазером▪ Slovenščina - Lasersko varjenje▪ Svenska - Lasersvetsning▪ తెలుగు - లేజరు బీమ్ వెల్డింగు▪ Українська - Лазерне зварювання▪ 中文 - 激光焊