Skip to main content

The F/E Series is a flatbed champion.

Available in a range of Laser powers from 1kw to 6kw and a big range of sizes.

Model F/E-3015 F/E-4020 F/E-6015 F/E-6020 F/E-6025 F/E-8025
Working Area 3048*1524 4000*2000 6100*1524 6100*2000 6100*2500 8100*2500
Laser Output Power   6/5/4/3/2/1,5/1kW      
X/Y-axis positioning accuracy 0.03mm 0.05mm        
X/Y-axis repositioning accuracy 0.02mm 0.03mm        
X/Y-axis Maximum Simultaneous Speed   140m/min      
Max acceleration speed   1.6G      
Max cutting speed   35m/min      

1000 Watt Fiber Laser

2000 Watt fiber Laser

3000 Watt fiber Laser


Applicable to various focal lengths, which are controlled by machine tool control system. Focal point will be automatically adjusted in cutting process to achieve the best cutting effect of different thicknesses sheets metal. We don’t need to do manual regulation, which effectively avoids errors or faults caused by manual operation and which greatly improves cutting speed.

When replacing different materials or different thicknesses sheet, manual focus laser head needs manual regulation, which is laborious and time consuming; auto focus laser head is controlled by control system, it can also read system storage parameters automatically, saving time and manpower;

Collimating protective lens drawer can better protect collimating lens and improve replacing speed of protective lens.

Built-in double water-cooling structures ensure the constant temperature of collimating and focusing components, avoiding overheating damage of lenses and eventual condense inside the head.  The cooling effect is much better with almost no heating or fogging in longterm cutting.  Service life drastically increase for the collimation protective lens and focus protective lens.

For reliable operation, the optical elements are protected from fusion spatter, metal dust and pollution –the head is completely sealed and protected from impurities in the cutting gas by easily replaceable cutting and pressure-resistant protective lenses.  The treated purging air in the collimator area permits neither process dust nor particles to penetrate.  The focusing lens is kept clean by a pressure-tight protective window cartridge (drawer type), even if the cutting gas is contaminated.

Quartz lenses of the highest quality ensure a stable focal position, which is extremely user-friendly, since they can be both laterally and vertically adjusted from the outside.

The advantages of fiber laser cutting:

More efficiency and less power consumption

The increased electrical efficiency of fiber laser technology drastically slashes the electrical consumption of the system which means a monthly savings on your utility bills and a reduction in the initial investment in electrical equipment and services.

Superior performance on thinner materials

The faster speed of nitrogen fiber laser cutting on thin walled more than doubles machine productivity compared to CO2: mild steel and medium thickness stainless steel are the materials that typically benefit the most from fiber laser technology.

No laser maintenance needed

The fiber laser does not require routine maintenance or rebuilding procedures. No laser gas is needed. Laser beam quality is stable over time and is available immediately upon start up.

New materials and new opportunities

Copper and brass, materials which were off-limits with CO2technology can be easily cut with fiber laser. Even tricky to cut aluminum and galvanized steels have no limits. Fiber technology offers new opportunities and a more robust production method for difficult materials.

Cast Iron Bed

A Cast Iron Bed Lasts Forever

A CAST iron bed has a high request on the technical strength and supply chain’s quality, especially the casting structural design. It is difficult to make structural design fit with casting process. As the workpiece size is too large, if lacking casting experience, it is easy to cause casting defects, such as trachoma, loosing, broken and other defects. We have strong technical strength and supply chain to ensure that we can produce high-quality casting bed.


Using flake graphite cast iron, the lowest tensile strength of which is 200MPa. High carbon content, high compressive strength and high hardness. Strong shock absorption and wear resistance. Low thermal sensitivity and bed gap sensitivity reduce the loss of equipment in using, so the machine accuracy could maintain for a long time, and no deformation in a life cycle.


High speed automatic pallet changer : 10 seconds changing time

Auto focus laser head

Optimal max cutting thickness with Fiber laser in different materials

Cutting thickness and parameters for metal 1000W 2000W 3000W 4000w
Carbon steel (O2) 12mm 16mm 20mm 22mm
Stainless steel (N2) 5mm 8mm 12mm 14mm
Aluminum (N2) 3mm 8mm 10mm 14mm
Brass (N2) 3mm 6mm 8mm 10mm
Copper (O2) 2mm 4mm 4mm 5mm

Automatic Nozzle Changer

Automatic Replacement

Automatic Calibration

Automatic Cleaning

Touch control

Touch control & Double HD Cameras

Touch screen with double HD cameras, give you the peak experience! The first one to use UI design in the world which lets display respond to processing table, making processing more intuitive; Elegant curves precisely fit machine body. Strong waterproof breathable system creates the best space, making operation more convenient

Wireless remote control equipment



For speedy service, we add WIFI function for our technician to operate troubleshooting and adjust parameters remotely.

Check laser source parameters to analyze failure causes.

Check cutting parameters to analyze and adjust new parameters.

Aesthetics was introduced to this industrial design which becomes a perfect combination of technology and aesthetics. Monitor surrounded by baking paint silver decoration,coordinated with diamond cutting tempered

 glass and alpine white sheet metal design.

Lightweight aluminium single piece casted bridge structure

We are updating our site to a newer version
Soon more info on this subject here - Thank you for your patience