Visit our special Laser Welding Website
Wobble6-PRO+ : the best handheld laser welding machine ever
Maximum applicable power
Focus lens specifications
Collimating lens specifications
Protective lens specifications
Welding Torch weight with digital distance control
|Wobble diameter adjustment||0 - 4 mm|
Maximum gas pressure for cutting
PWM adjustable range
Swing frequency (four times higher than model 3 and 4+)
Double protection lens design, better dust resistance: By adding a second protecction glass, dust, fume, spatter and dirt never get a chance anymore to contaminate your lenses and reduce the efficiency of welding. While exchanging the first protection glass, your valuable lenses stay fully protected with a second protection glass. This feature keeps your lenses always clean and results in almost never needed to change your lenses! this creates an anual saving!
- Adjust the focus length of your welding nozzle in seconds
- Change your nozzle, and only the top of the nozzle in a flash
- Custom made nozzles are easy to make
- different nozzle-ends available for specific use
- changeover from nozzle in kles than 30 seconds
Very ergonomic and light welding torch with a weight of only 913 grams. The perfect solution for high precision works and the best and most comfortable torch for long lasting jobs! Although we included double wobble motors, double protection lenses, full distance control, we still got a lightweight torch to work continious full shifts.
Compared with traditional handheld laser welding machine, the welding advantages are obvious. The laser swing amplitude (range: 0mm-4mm), power, wire feed welding mode etc, can be set through the control system on the torch during the welding process. The width of the weld seam can be customized through the swing amplitude, which solves the defect of traditional hand-held laser welding that requires high weld seams. Greatly improve the welding fault tolerance rate.
On-torch controll and ddisplay of following welding parameters with one finger:
- Welding power
- Welding width
- Welding mode: Continue welding - pulsed welding - laser cutting - laser cleaning
- Wire feed - wire forward - wire backward
- Ramping up and ramping down
- Wire speed forward and backwards
Moreover, safety protection measures have been added, which only emit light to metal! The operation is simple and easy to use, the structure is simple and easy to maintain, the volume is greatly reduced, and the wire can be fed during the welding process, which is suitable for industry and household use. Change all your welding settings from your workspot. No need to run to your controller, its all on your fingertips. in the welding torch.
Now Our PRO version of the Wobble-Series can cut easily steel plates with the free hand.
Straight lines, contours, almost every metal and every form can be cut with our handheld Laser welding Machine!
No more limits in your creativity and productivity!
Hand-operated laser cutting
Today's fiber laser sources have the power and beam quality needed to cut and join metal in an expeditious and repetitious manner. The market demands that type of flexible production, so those characteristics are basic requirements in modern laser devices. Market demands also have promoted the idea of multifunctional processing. That has led to the development of a combination head capable of laser cutting, laser cleaning and welding 3-D metal workpieces.
The "wobble-6PRO-Plus," can perform 3-D cutting, cleaning and welding in an arbitrary sequence without retooling. Part handling, positioning, and clamping steps are eliminated with this approach. The result is reduced production time and costs, as well as improved manufacturing accuracy.
Moreover, the combi-head opens up the door to fabricating complex metal components with a range of variants, which could not be produced cost-efficiently before.
While the concept of multifunctional laser processing is straightforward and the market seems to be ready for such a device, some technical problems had to be solved before it became reality.
Now its available from Lasermach
The concept of the 2-D dynamic beam motion or lineair wobble head technology. Independent control of the amplitude and frequency of the oscillation is achieved through a high speed servo controller, allowing more ﬂexibility in stabilizing the keyhole melt during the welding process.
Stability of the keyhole melt is a critical factor when laser welding dificult highly reﬂective materials such as copper and aluminum. This is partly due to the tendency to spatter, and in the case of some aluminum alloys, a high level of porosity due to the viscosity and surface tension of the melt when using more traditional laser welding techniques. Recent studies have shown the reduction or elimination of these problems with the beam wobble technique, including a recent systematic study with and without fller wire on automotive aluminum alloys.
Overall, the wobble head technique allows for better temperature management of the part. Because the beam passes near any given point of the weld multiple times, the ramp in temperature and cooling rates is slower than in traditional laser welding, which helps eliminate defects and manage spatter.
In addition, this welding technique is compatible with typical welding accessories such as assist gas ports and coaxial nozzles that enable plume suppression and can help control spatter; techniques that are not readily compatible with the scan heads used in remote welding.
In addtion to stabilizing the keyhole melt and reducing porosity in the subsequent weld, the beam wobble technique has proven valuable for alleviating the part-fit requirements for laser welding. Using one of the programable shapes (infnity in this case) and optimizing the amplitide and frequency of the oscillation, an increase in the acceptable seam gap of three times that achieved in conventional laser welding has been demonstrated.