Skip to main content

WOBBLE6-PRO+: the best handheld Laser torch on the market!

Available from September 2021

Wobble-6PRO-Plus

The Best handheld Laser Torch Available

Most flexyble handheld laser torch on the market!

Unique welding parameter control system on the torch!

Maximum applicable power

2000W

Focus lens specifications

D=20mm, F=150mm

Collimating lens specifications

D=20mm, F=50mm

Protective lens specifications

D=20mm, T=3mm

Welding Torch weight with digital distance control

918 grams

Wobble diameter adjustment0 - 4 mm

Maximum gas pressure for cutting

15kg

PWM adjustable range

0-10KHz

Swing frequency (four times higher than model 3 and 4+)

0-400Hz

Double dust protection of lenses

Highest lifetime on the market with full twin dust protection.

Double Protection agains dust and spatter

Never to change your lenses again!

Double protection lens design, better dust resistance:  By adding a second protecction glass, dust, fume, spatter and dirt never get a chance anymore to contaminate your lenses and reduce the efficiency of welding. While exchanging the first protection glass, your valuable lenses stay fully protected with a second protection glass. This feature keeps your lenses always clean and results in almost never needed to change your lenses! this creates an anual saving!

Fast adjustable and changeable Nozzle

Weld always with the perfect nozzle and the exact focus length

  • Adjust the focus length of your welding nozzle in seconds 
  • Change your nozzle, and only the top of the nozzle in a flash
  • Custom made nozzles are easy to make
  • different nozzle-ends available for specific use
  • changeover from nozzle in kles than 30 seconds

Lightweigth but full of high tech

only 913 grams

Very ergonomic and light welding torch with a weight of only 913 grams.  The perfect solution for high precision works and the best and most comfortable torch for long lasting jobs! Although we included double wobble motors, double protection lenses, full distance control, we still got a lightweight torch to work continious full shifts.

Digital control of the welding parameters with one finger on the welding torch

Safe time by fast parameter setting!

Change all your welding settings from your workspot.  No need to run to your controller, its all on your fingertips. in the welding torch. 

On-torch controll and ddisplay of following welding parameters with one finger:

  • Welding power
  • Welding width
  • Welding mode: Continue welding or pulsed welding
  • Welding form: Circle, line, triangle,..
  • Ramping up and ramping down
  • Wire feed forwaard and backwards

 

Double Wobble head technology

2-D dynamic beam motion

The concept of the 2-D dynamic beam motion or double wobble head technology. The six basic programmable shapes available from an industry-standard wobble welding head are shown. Independent control of the amplitude and frequency of the oscillation is achieved through a high speed servo controller, allowing more flexibility in stabilizing the keyhole melt during the welding process. 

Stability of the keyhole melt is a critical factor when laser welding dificult highly reflective materials such as copper and aluminum. This is partly due to the tendency to spatter, and in the case of some aluminum alloys, a high level of porosity due to the viscosity and surface tension of the melt when using more traditional laser welding techniques. Recent studies have shown the reduction or elimination of these problems with the beam wobble technique, including a recent systematic study with and without fller wire on automotive aluminum alloys.

Overall, the wobble head technique allows for better temperature management of the part. Because the beam passes near any given point of the weld multiple times, the ramp in temperature and cooling rates is slower than in traditional laser welding, which helps eliminate defects and manage spatter.

In addition, this welding technique is compatible with typical welding accessories such as assist gas ports and coaxial nozzles that enable plume suppression and can help control spatter; techniques that are not readily compatible with the scan heads used in remote welding.

In addtion to stabilizing the keyhole melt and reducing porosity in the subsequent weld, the beam wobble technique has proven valuable for alleviating the part-fit requirements for laser welding. Using one of the programable shapes (infnity in this case) and optimizing the amplitide and frequency of the oscillation, an increase in the acceptable seam gap of three times that achieved in conventional laser welding has been demonstrated.