Shipboard corrosion control and preparation of surfaces for recoating are two of the most expensive maintenance challenges facing both military and civilian ship operators. For example, the US Navy estimates that fighting corrosion absorbs 25 cents of every maintenance dollar; the annual corrosion cost for Navy ships in 2017 was estimated at $5.6 billion. Ever-increasing operations tempo, as well as business economics, manning reductions, training cutbacks, shortened shipyard availabilities, and diminished waterfront/intermediate maintenance capacity all contribute to a growing need for new and better maintenance approaches.
Swipe2: Lasermach’s laser ablation cleaning technology is a game-changer in this demanding environment.
The Lasermach system removes rust and mill scale from steel materials like no other method. The laser excites the oxygen in the corrosion layer, popping the oxide off the native metal. Laser cleaning with color pulse control is highly selective, removing only metal oxides, and leaving the parent metal substrate intact.
The laser is highly selective, removing only metal oxides, and leaving the parent metal substrate intact. Laser decoating and surface preparation of original grit-blasted surfaces removes corrosion and coatings to reveal the original surface roughness characteristics. A surface that has been laser ablated is ready to recoat, without any further preparation. The physics of the laser process make it exceptionally effective in removing corrosion products from weldments and complex details in ships’ structures. The laser can efficiently remove corrosion products from any textured surfaces or notch details that the laser can “see”.
- The physics of laser process make it unprecedentedly effective in removing corrosion from any complex details in ships’ body and components.
- The laser energy absorption is highly selective, thus, can remove metal oxides while keeping the native metal substrate intact. The rust/oxide is either vaporized or suctioned away as particles.
- It is possible to selectively remove coatings in a multi–layer paint system. The ablation depth for single scan can be controlled within a few micrometer and this process is repeated until reach the desired depth.
- Laser technology can precisely clean certain spots on that surface, giving the focus beam spot size can be as small as tens of micrometers.
- Laser process can produce roughness surface characteristics while removing corrosion to get ready for re-painting without any further preparation.
To improve cleaning efficiency, laser derusting uses high energy, high frequency, high power characteristics. Lasermach’s uses MOPA fiber laser Sources that can produce pulses with large single pulse energy of 30mJ, high average power of 500W, and high repetition frequency up to 2000kHz for efficient laser derusting.
By adjusting different combination of the above parameters, Lasermach High Power Swipe series laser can remove various types of rust/painting.
The corrosion products of steel are normally made of iron ferro-oxide (Fe2O3) in the color of red or yellow. The iron Iron-oxide on the metal surface can be removed rapidly with large beam diameter and high average power. Corrosion product of ferriferrous oxide / ferrous oxide layer is stubborn and requires higher power density for removal, therefore, small beam diameter and large pulse energy are needed.
Paint removal from steel structure is executed for shipyards of marine and offshore engineering. Due to environmental unfriendliness and unhealthy drawbacks of sand blasting technique, laser ablation technique is proposed as a substituting method. By absorbing high energy of the 1064 nm pulsed laser, the paint is vaporized quickly.
The ablated debris is then collected by using a suction pump. Initial metal surface of the steel is exposed when laser beam irradiates perpendicularly and scans over it. The cleaned surface fulfills the requirements of surface preparation standards ISO 8501 of SA2. The repainting can be embedded onto the laser cleaned surface to bond much more tightly. The excellent adhesion strength of 20 MPa between repainted coating and the substrate is achieved, which is higher than what is required by shipyards applications.
Laserreiniging in belgië- laserreinigen in Nederland - laser cleaning in the UK - laser cleaning in Ireland - laser cleaning in South Africa - laser skoonmaak in Suid-Afrika - nettoyage laser en France - nettoyage laser en Belgique - nettoyage laser au Luxembourg - Laserreinigung in Deutschland - Laserreinigung in Österreich - limpieza láser en españa - pulizia laser in italia - limpeza a laser em portugal - Laser cleaning in scotland - laserrensning i danmark - curățarea cu laser în Romania - nettoyage laser en Suisse - Laserreinigung in der Schweiz - laser bidezko garbiketa espainian - limpieza laser en españa - laserové čištění v česku - Laserové zváranie na slovensku - lasersko čiščenje v sloveniji - lasersko čišćenje u hrvatskoj - lasersko čišćenje u bosni - ласерско чишћење у србији - лазерно почистване в българия - καθαρισμός με λέιζερ στην Ελλάδα - czyszczenie laserowe w polsce - лазерне чищення в україні - лазерная чистка в украине - laserpuhastus valges venemaal - Лазерная зварка ў Беларусі - лазерная чыстка ў белай расіі - laserpuhdistus Suomessa - laserrengöring i sverige - laserrengjøring i norge - Laser cleaning in united states - Laser cleaning in canada - nettoyage au laser au Canada - türkiye'de lazer temizleme - ניקוי לייזר בישראל